Introduction
- HiPure Plasmid DNA Plus 96 Kit:
- Enables up to 96 mini-preps to be performed simultaneously.
- Process completed in less than 45 minutes using the Vacuum Manifold (Qiavac 96).
- Provides a fast, simple, and cost-effective method for high-throughput plasmid DNA extraction in routine molecular biology laboratory applications.
- Key Features:
- Utilizes silica-membrane technology, eliminating cumbersome steps associated with loose resins or slurries.
- Plasmid DNA purified with the kit is immediately ready for use.
- Eliminates the need for phenol extraction and ethanol precipitation.
- High-quality plasmid DNA is eluted in a small volume of Tris buffer or water.
Details
Specifications
| Features | Specifications |
| Main Functions | Isolation up to 20µg plasmid DNA from 1.5ml bacterial culture using 96 well bind plate and 96 filterplate |
| Applications | Enzyme digestion, sequencing, PCR, labeling, etc. |
| Purification method | 96 well plate |
| Purification technology | Silica technology |
| Process method | Manual (centrifugation or vacuum) |
| Sample type | Conventional plasmid, plasmid less than 30KB |
| Sample amount | 1-1.5ml（x96） |
| Yield | 1-15µg/1ml |
| Elution volume | ≥70μl |
| Time per run | ≤60 minutes |
| Liquid carrying volume per column | 800µl |
| Binding yield of column | 70µg |
Principle
- HiPure Plasmid Procedure:
- Based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt.
- Utilizes a unique silica membrane that replaces glass or silica slurries for plasmid DNA minipreps.
- Procedure Steps:
- Preparation and Clearing of Bacterial Lysate:
- The alkaline method is used to prepare and clear bacterial lysate.
- DNA Binding:
- Supernatant transferred to a column to bind DNA to the silica membrane.
- Washing and Elution:
- Proteins and other impurities washed away.
- Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
- Preparation and Clearing of Bacterial Lysate:
Advantages
- High purity – purified plasmid can be directly used in sequencing, enzyme digestion PCR, etc.
- Fast – it takes only 60 minutes to complete the isolation
- High yield – up to 1mg plasmid can be bound in one column
- Economy – high cost-performance
Kit Contents
| Contents | P100601 | P100602 | P100603 |
| Purification Times | 1 x 96 Preps | 4 x 96 Preps | 20 x 96 Preps |
| RNase A | 5 mg | 20 mg | 100 mg |
| Buffer P1 | 30 ml | 120 ml | 600 ml |
| Buffer P2 | 30 ml | 120 ml | 600 ml |
| Buffer P3 | 40 ml | 180 ml | 800 ml |
| Buffer PW1 | 100 ml | 500 ml | 2 x 1000 ml |
| Buffer PW2 | 50 ml | 2 x 100 ml | 4 x 200 ml |
| Elution Buffer | 150 ml | 60 ml | 300 ml |
| Lysate Clear Plate | 1 | 4 | 20 |
| HiPure DNA Plate | 1 | 4 | 20 |
| 1.6 ml Collection Plate | 1 | 4 | 20 |
| 0.5ml Elute Plate | 1 | 4 | 20 |
Storage and Stability
The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After the addition of RNase A， Buffer P1 is stable for 6 months when stored at 2-8°C.
Purchase Guide
| Name | CAT NO | Sample amount | Column type | Elution volume | Yield | Time per run | Centrifuge requirements |
| HiPure Plasmid Mini Kit | P1001 | 1-5ml | 1.5ml column | 30-50μl | 5–35µg/5ml | ≤30 minutes | small centrifuge |
| HiPure Plasmid Mini Kit II | P1002 | 5-15ml | 1.5ml column | 75-100μl | 20-80µg/15ml | ≤30 minutes | small centrifuge |
| HiPure Plasmid Plus 96 Kit | P1006 | 1-1.5ml | 96 well plate | 70-150μl | 1-15μg/1ml | ≤60 minutes | 96-well plate centrifuge |
| HiPure Fastfilter Plasmid Midi Kit | P1013 | 30-50ml | 15ml column | 0.3-0.8ml | 50–250µg/50ml | ≤60 minutes | 15ml centrifuge |
| HiPure Fastfilter Plasmid Maxi Kit | P1014 | 100-200ml | 50ml column | 0.5-1.5ml | 0.4–1mg/200ml | ≤60 minutes | 50ml centrifuge |
Reviews
There are no reviews yet.