Solarbio Ca++Mg++-ATPase-Aktivitätstest-Kit

$42.00

Versand USD 45 - Kostenlos über USD 300

DTE ist eine in China ansässige E-Commerce-Plattform, die sich auf den Online-Verkauf von molekularen Tests spezialisiert hat, ELISA, und verwandte Produkte.

  • Hersteller: Führende chinesische Marken
  • Versand: Beschleunigter FedEx-Versand direkt aus den Fabriken
  • Rückgabe oder Umtausch innerhalb von möglich 30 Tage
  • Zahlungsarten: Sicheres PayPal oder Kreditkarte.

Beschreibung

Ca++Mg++-ATPase Activity Assay Kit

Notiz: Nehmen Sie vor dem Test zwei oder drei verschiedene Proben zur Vorhersage.

Betriebsausrüstung: Spectrophotometer

Katze nein: BC0960

Größe: 50T/24S

Komponenten:

Reagenz I: Liquid 30 ml×1. Lagerung bei 4℃.

Reagenz II: Liquid 4 ml×1. Lagerung bei 4℃.

Reagenz III: Pulver×2. Storage at -20℃. Dissolve thoroughly with 1 mL of distilled water before use. The rest reagent can be kept at -20℃ for one week.

Reagent IV: Liquid 2 ml×1. Lagerung bei 4℃.

Reagent V: Pulver×1. Lagerung bei 4℃. Dissolve thoroughly with 3 mL of distilled water before use. Reagent VI: Pulver×1. Lagerung bei 4℃. Dissolve thoroughly with 15 mL of distilled water before use, can be kept at 4℃ for one week.

Reagent VII: Pulver×1. Lagerung bei 4℃. Dissolve thoroughly with 15 mL of distilled water before use, can be kept at 4℃ for one week.

Reagent VIII: Liquid 15 ml×1. Storage at RT.

Standardlösung: Liquid 1 ml×1. 10 μmol/mL standard phosphorus liquid, storage at 4℃.

0.5 μmol/mL standard phosphorus working solution: Dilute the 10 μmol/mL standard 20 times with distilled water to 0.5 μmol/mL standard. Zum Beispiel: hinzufügen 1.9 ml destilliertes Wasser auf 0.1 mL of standard, mix thoroughly.

Phosphorus fixing reagent:

Prepare reagents for determining phosphorus content: make solution as the volume ratio of H2O: Reagent VI: Reagent VII: Reagent VIII =2:1:1:1, which should be light yellow. It shows lose efficacy if color is changed, phosphorus pollution if color is change to blue. Prepare the reagent when it will be used.

Notiz: It is better to use new beakers, glass rods and glass pipettes or disposable plastic ware when making reagent to avoid phosphorus pollution.

Produktbeschreibung:

Ca++Mg++-ATPase is widely distributed in plants, Tiere, microorganisms and cells, which catalyzes the hydrolysis of ATP to form ADP and inorganic phosphorus.

Ca++Mg++-ATPase decomposes ATP to produce ADP and inorganic phosphorus. The activity of ATPase can be detected by measuring the amount of inorganic phosphorus.

Erforderliche, aber nicht bereitgestellte Reagenzien und Ausrüstung:

Spectrophotometer, desk centrifuge, verstellbare Pipette, Wasserbad, 1 mL glass cuvette, Mörtel/Homogenisator, ice and distilled water.

 

Verfahren:

ICH. Probenvorbereitung:

  1. Bacteria or cells:

Collecting bacteria or cells into a centrifuge tube, centrifugation, and discard supernatant. Suggest add 1mL of Reagent I to 5 million of bacteria or cells. Use ultrasonic to splitting bacteria and cells (placed on ice, ultrasonic power 20%, working time 3 Sekunden, interval 10 Sekunden, repeat for 30 mal). Zentrifuge bei 8000 ×g für 10 minutes at 4℃ and take the supernatant on ice before testing.

  1. Gewebe:

Hinzufügen 1 mL of Reagent I into 0.1 g of tissue, fully grinding on ice. Zentrifuge bei 8000 ×g für 10 minutes at 4℃ and take the supernatant on ice before testing.

  1. Serum: Directly

II. Bestimmung:

  1. Preheat spectrophotometer for 30 Protokoll, adjust the wavelength to 660 nm, set the counter to zero with distilled water.
  2. Add the following reagents to EP tube:
Reagens (μL)Control tube (C)Test tube (T)
Reagenz I13090
Reagenz II8080
Reagenz III4040
Reagent IV 40
Probe 200
Mix thoroughly, then place the reaction solution in a 37℃ (mammal) or 25℃ (other species) water bath for 10 Protokoll.
Reagent V5050
Probe200 
Mix thoroughly, Zentrifuge bei 4000 ×g für 10 minutes at room temperature, Nimm den Überstand.
  1. Determination of phosphorus content, add the following reagents to 1.5 mL EP tube:
Reagens (μL)Blank tube (B)Standard tube (S)Control tube (C)Test tube (T)
0.5 μmol/mL standard phosphorus liquid  

100

  
Supernatant  100100
Distilled water100   
Reagents for determining phosphorus content 

1000

 

1000

 

1000

 

1000

Mix thoroughly, then place the mix solution in a 40℃water bath for 10 Protokoll. Cooling to room temperature and detect the absorbance at 660 nm. The blank tube and standard tube just need one or two tubes.

III. Calculation:

  1. Serum:

Unit definition: One unit of enzyme activity is defined as the amount of enzyme catalyzes the decomposed of ATP to produce 1 μmol of inorganic phosphorus per hour every milliliter of serum.

Ca++Mg++-ATPase (U/mL)=Cs×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]×Vrv÷s÷T

=7.5×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]

2. Gewebe, Bakterien, oder Zellen

  • Protein concentration:

Unit definition: One unit of enzyme activity is defined as the amount of enzyme catalyzes the decomposed of ATP to produce 1 μmol of inorganic phosphorus per hour every milligram of tissue protein.

Ca++Mg++-ATPase (U/mg prot)=Cs×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]×Vrv÷(Vs×Cpr)÷T

=7.5×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]÷Cpr

  • Sample weight:

Unit definition: One unit of enzyme activity is defined as the amount of enzyme catalyzes the decomposed of ATP to produce 1 μmol of inorganic phosphorus per hour, every milligram of tissue.

Ca++Mg++-ATPase (U/g weight)=Cs×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]×Vrv÷(Vs÷V1×W)÷T

=7.5×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]÷W

  • bacteria or cells

Unit definition: One unit of enzyme activity is defined as the amount of enzyme catalyzes the decomposed of ATP to produce 1 μmol of inorganic phosphorus per hour every 10000 cells or bacteria.

Ca++Mg++-ATPase (U/104cell )=Cs×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]×Vrv÷(Vs÷V1×500)÷T

=0.015×[ΔA(T)-ΔA(C)]÷[ΔA(S)-ΔA(B)]

Cs: Concentrate of standard tube, 0.5 μmol/mL;

Vrv: Total reaction volume, 0.5 ml; Vs: Probenvolumen, 0.2 ml;

Cpr: Sample protein concentration (mg/ml); T: Reaction time (Mindest), 1/6 Stunde;

W: Sample weight (G);

Vl: Volume of reagent I, 1 ml;

500: The amount of bacteria or cell, 5 million.

Notiz

  1. This kit can detect 24 tubes of Ca++Mg++ -ATPase samples in 50 tubes for each sample need one tube as control.
  2. This method has the characteristics of trace, sensitive and rapid. The test tubes used for determination are phosphate-free strictly. Avoiding phosphorus pollution is the key to the success of detection.

Experimentelles Beispiel:

  1. Take of pancreas and add 1 mL of Reagent I for ice bath homogenization. After centrifugation at 4℃ for 10 Mindest, the supernatant is put on the ice and operated according to the determination steps. ΔAT = 0.916-0.389=0.527, ΔAS =0.398-0.004=0.394

Ca++Mg++- ATPase activity (U/g mass) = 7.5 × ΔAT ÷ΔAS ÷ W = 100.32 U/g mass.

  1. Take 0.1g of willow and add 1 mL of Reagent Ⅰ for ice bath homogenization. After centrifugation at 4℃ for 10 Mindest, the supernatant is put on ice and operated according to the determination steps. The ΔAT=0.137-0.124=0.013, and the ΔAS=398-0.004=0.394

Ca + + Mg + + – ATPase activity (U/g mass) = 7.5×ΔAT ÷ ΔAS ÷ W = 2.47 U/g mass.

Verweise

[1] Datiles M J, Johnson E A, McCarty R E. Inhibition of the ATPase activity of the catalytic portion of ATP synthases by cationic amphiphiles[J]. Biochimica et Biophysica Acta (BBA)-Bioenergetics, 2008, 1777(4): 362-368.

Verwandte Produkte

BC0060/BC0065 Na+K+ — ATPase Activity Assay Kit

BC0300/BC0305 ATP Activity Assay Kit

Bewertungen (0)

Bewertungen

Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „Solarbio Ca++Mg++-ATPase-Aktivitätstest-Kit“

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Anhang

Warenkorb
Nach oben scrollen