Solarbio Soil Genomic DNA Extraction Kit

Contenido del kit

Nota: Once opened, Solution A, B, C, D should be kept at 2-8℃. PCR Enhancer should be kept at -20℃.

Descripción del Producto

• Suitability and Efficacy:
  • Soil Extracción de ADN genómico Kit is ideal for extracting microbial DNA from extreme soil environments like cinnamon soil, mud, volcanic ash, etc..
  • It effectively lyses bacteria and fungi, preserving microbial DNA diversity.
• Humus Removal:
  • Utilizes unique humus adsorption material to efficiently and specifically remove various humus components.
  • This process doesn’t compromise yield, and purity is significantly higher compared to the phenol-chloroform extraction method.
• DNA Yield and Integrity:
  • Extracted DNA yields are substantial, and integrity is well maintained.
  • The extracted DNA is suitable for various routine operations, including enzyme digestion, PCR, library construction, Southern blot, etc..

Protocolo

Add fresh opened absolute ethanol in the Washing Buffer before use, volume is based on the label of the bottle as a reference. Put the cap back on the bottle and shake well. All centrifuge steps are performed at room temperature (15℃-25℃).

1. Method A: Weigh soil sample 0.1-0.5g, add soil into the mortar, pour the proper amount of liquid nitrogen, grind immediately, and repeat three times. When the soil turns into powder, add 450ul Solution A, and keep shaking for 1-2min until the solute is completely suspended.

Method B: Weigh soil sample 0.1-0.5g in centrifuge tube (it is better to use 2ml round bottom), add 450ul Solution A, and keep shaking for 1-2min until solute is completely suspended. Nota: The effect of grinding with liquid nitrogen will be better.

2. Add 50ul Solution B, and invert the tube several times to mix fully (don’t shake violently). Incubate at 65℃ water bath for 6 mín., invert, and mix each 2 mín..
3. Add 100ul Solution C, and invert the tube several times to mix fully (don’t shake violently). Centrifugar en, 12000rpm para 10 mín..
4. Transfer supernatant to a new centrifuge tube, centrifugar en, 12000rpm para 10 mín..
5. Add 200ul Solution D to the Adsorption Column, add supernatant centrifuged from step 4 to the Adsorption Column, mixed fully by pipette. Centrifuge at 12000rpm for 1 mín..
6. Mix filtrate in Collection Tube fully, add it into Adsorption Column, and centrifuge at 12000rpm for 1 mín..
7. Remove waste liquid in the Collection Tube, add 500ul Washing Buffer in the Adsorption Column, and centrifuge at 12000rpm for 10 mín..
8. Repita el paso 7 twice (wash three times in total).
9. Remove waste liquid in the Collection Tube, put the Adsorption Column back into the Collection Tube, and centrifuge at 12000rpm for 2 mín..
10. Dry the Adsorption Column at room temperature(15℃-25℃) for a few minutes or at 50℃ for 1 minuto.
11. Put the Adsorption Column in a new centrifuge tube, add 50-100ul Washing Buffer (preheat at 65℃ before use), and centrifuge at 12000rpm for 1 mín..
12. Add filtrate in the centrifuge tube to the Adsorption Column, centrifugar a 12000rpm para 1 mín.. Liquid in the centrifuge tube is soil genomic DNA extraction solution.
13. If the PCR effect of DNA is not good, properly dilute DNA concentration or add 1/10 volume of PCR enhancer.

Notas

1. Fresh soil samples will get a higher yield. And it is better to refer to proper preservation conditions for different samples.
2. If the solution shows precipitation, redissolve at 37℃ water bath for a moment, precipitation will disappear, and it does not affect DNA extraction.
3. When taking supernatant, it should avoid taking precipitation, de lo contrario, it will block the absorption column and affect the purity of the product.
4. Volume of the Elution buffer shouldn’t be less than 50ul, if the volume is too small, it will affect recovery It is suggested to use the Elution buffer provided with the kit, using water as an Elution buffer will lose a part of the DNA. Extracted DNA should be stored at -20℃ and avoid repeated freeze-thaw cycles to prevent DNA degradation.
5. If the product contains residual humus, it will seriously affect DNA absorbance, so it should be identified by a combination of electrophoresis detection and spectrophotometer
6. Avoid touching liquid reagents, in case of accidental contact, rinse immediately with plenty of water.

Productos relacionados

• T1050 5×TBE Buffer
• T1060 50×TAE Buffer
• M1400 1kb DNA Ladder
• M1060 D2000 DNA Ladder
• D1010 6×DNA Loading Buffer
• G8142 GoldView II Nuclear Staining Dyes (5000×)
• D1500 Plant Genomic DNA Extraction Kit
• D1600 Bacterial Genomic DNA Extraction Kit
• D1700 Animal Tissues/Cells Genomic DNA Extraction Kit D1800 Blood Genomic DNA Extraction Kit (Spin column)