Product Overview
仕様 | 詳細 |
---|---|
有効期間 | 6 月 |
ストレージ | 2-8℃ |
ユニット | 箱 |
英語名 | Albumin Content Assay Kit (Bromocresol Green Colorimetry) |
検出方法 | 分光光度計/マイクロプレートリーダー |
仕様 | 100T/96S |
Product Components
試薬名 | 仕様 | 保存条件 |
---|---|---|
抽出液 | 液体 110 mL×1本 | 2-8℃ |
試薬 1 | 液体 0.28 mL×1 vial | 2-8℃ |
試薬 2 | 液体 25 mL×1本 | 2-8℃ |
試薬 3 | 液体 0.3 mL×1 vial | 2-8℃ |
Standard Solution | 液体 1 mL×1 vial | -20℃ |
溶液の準備:
- Color Development Solution:
- Prepare the color development solution according to the number of samples by mixing Reagent One, 試薬 2, and Reagent Three in the ratio of 10μL: 990μL: 10μL (1010μL for 5 tests). Mix thoroughly and use immediately.
- Standard Solution:
- Prepare a 10 mg/mL albumin standard solution. ご使用の前に, take 200μL of the 10 mg/mL albumin standard solution and add 200μL of the extraction solution to prepare a 5 mg/mL albumin standard solution. Mix thoroughly and use immediately.
製品説明:
- Albumin:
- The liver synthesizes the main protein in human plasma.
- An important nutrient that maintains plasma osmotic pressure.
- Binds with various nutrients, hormones, and drugs.
- Reflects the nutritional status of the body.
- Used to screen for diseases affecting liver metabolic function (例えば, cirrhosis, liver damage, malnutrition, malignant tumors).
- 検出方法:
- In a pH 4.2 buffer solution, serum albumin carries a positive charge.
- In the presence of a non-ionic surfactant, albumin binds with the negatively charged dye Bromocresol Green.
- Forms a blue-green complex.
- The complex has an absorption peak at a wavelength of 630 nm.
- Color intensity is directly proportional to the concentration of albumin.
- Reaction:
- Albumin + Bromocresol Green → Blue-Green Complex (630 nm)
注記:
- Before the experiment, selecting 2-3 samples with expected large differences is recommended to conduct a preliminary experiment.
- サンプルの吸光度が測定範囲外の場合, diluting or increasing the sample volume is recommended for detection.
必要な機器と消耗品 (to be prepared):
- Visible spectrophotometer/microplate reader
- 低温遠心分離機
- Analytical balance
- Microglass cuvettes/96-well plates
- Adjustable pipettes
- Mortar/homogenizer/ultrasonic cell disruptor
- 氷と蒸留水
手順:
Sample Processing (The sample volume can be adjusted accordingly; specific ratios can be referenced from literature):
- Tissue Samples:
- Add extraction solution in a ratio of sample mass (g) to extraction solution volume (mL) の 1:5~10 (recommend weighing 0.1g of the sample and adding 1.0mL of extraction solution).
- Homogenize the sample in an ice bath, then centrifuge at 4℃, 8000グラムのための 10 分.
- Discard the pellet and keep the supernatant on ice for testing.
- Bacterial/Cell Samples:
- Add extraction solution in a ratio of bacterial/cell count (10^6) to extraction solution volume (mL) of 5~10:1 (recommend adding 1.0mL of extraction solution to 5 million bacteria/cells).
- Disrupt the bacteria/cells in an ice bath using an ultrasonic cell disruptor (power 200W, ultrasonicate for 3s, インターバル7秒, 合計時間 5 分).
- Centrifuge at 4℃, 8000グラムのための 10 分.
- Discard the pellet and keep the supernatant on ice for testing.
- Liquid Samples:
- Measure directly.
- If the liquid is turbid, centrifuge and use the supernatant for measurement.
- Preparation of Visible Spectrophotometer/Microplate Reader:
- Preheat the visible spectrophotometer/microplate reader for at least 30 分.
- Set the wavelength to 630 nm.
- Zero the visible spectrophotometer with distilled water.
- Operation Table (Add the following reagents to micro glass cuvettes/96-well plates):
試薬名 (μL) | 試験管 | 標準チューブ | ブランクチューブ |
---|---|---|---|
サンプル | 20 | – | – |
Standard Solution | – | 20 | – |
抽出液 | – | – | 20 |
Color Development Solution | 200 | 200 | 200 |
- Mix well and let stand at room temperature for 20 秒.
- Measure the absorbance of each tube at 630 nm, recording the values as A_test, A_standard, and A_blank.
- Calculate ΔA_test = A_test – A_blank, and ΔA_standard = A_standard – A_blank.
- Note that the blank tube and standard tube only need to be measured 1-2 回.
注記: The length of the standing time can affect the detection results. It is recommended to react directly in the micro glass cuvettes/96-well plates for 20 seconds and then measure the absorbance.
Albumin Content Calculation
1. Calculation by Sample Protein Concentration
Albumin content (mg/mgプロット) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ (V sample × Cpr) = 5 × ΔA measured ÷ ΔA standard ÷ Cpr
2. Calculation by Sample Mass
Albumin content (mg/g 質量) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ (W × V sample ÷ V sample total) = 5 × ΔA measured ÷ ΔA standard ÷ W
3. Calculation by Bacterial/Cell Number
Albumin content (mg/10^6 cells) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ (V sample × N ÷ V sample total) = 5 × ΔA measured ÷ ΔA standard ÷ N
4. Calculation by Liquid Volume
Albumin content (mg/mL) = ΔA measured × (C standard ÷ ΔA standard) × V sample ÷ V sample = 5 × ΔA measured ÷ ΔA standard
Definitions:
- C standard: Standard tube concentration, 5 mg/mL;
- V sample: サンプルボリュームを追加しました, 0.02mL;
- V sample total: Total extract volume added, 1mL;
- 心肺蘇生法: サンプルタンパク質濃度, mg/mL;
- W: Sample mass, g;
- N: Total number of bacteria/cells, in 10^6
ノート:
- If ΔA_test is less than 0.010 or the absorbance of the test tube is close to that of the blank tube, you can increase the sample volume before measurement. If ΔA_test is greater than 0.5, it is recommended to appropriately dilute the sample supernatant with extraction solution before measurement. Note to simultaneously adjust the calculation formula.
- If the sample becomes turbid after adding the color developer, it is recommended to appropriately dilute the sample supernatant with extraction solution before measurement. Note to simultaneously adjust the calculation formula.
Experimental Example:
- Take 20μL of human serum sample, dilute it 10 times with extraction solution, follow the measurement steps, and measure it using a 96-well plate. 計算: ΔA_test = A_test – A_blank = 0.426 – 0.124 = 0.302, ΔA_standard = A_standard – A_blank = 0.406 – 0.124 = 0.282. Calculated based on liquid volume: Albumin Content (mg/mL) = 5 × ΔA_test ÷ ΔA_standard × 10 (dilution factor) = 53.546 mg/mL.
レビュー
まだレビューはありません.