Solarbio ATP ADP AMP Content HPLC Assay Kit 50T | 48S

注記: テスト前に予測のために 2 つまたは 3 つの異なるサンプルを採取します. 操作装置: High-performance liquid chromatography カタログ番号: BC5114

サイズ：50T/48S

コンポーネント:

Extract solution I: 80 mL×1. Storage at 2-8℃.

Extract solution II：40 mL×1. Storage at 2-8℃.

試薬I: 15 mL×1. Storage at 2-8℃. ご使用の前に, 取る 3.5 mL of reagent I and add it to 1000 mL of ultrapure water, adjust its pH to 6.15 with reagent II to form mobile phase B, and seal it.

試薬II:10 mL×1. Storage at 2-8℃.

ATP Standard： パウダー×1. -20℃で保管. ご使用の前に, 1.8 mL distilled water is added to prepare 1 μモル / mL ATP standard solution, which was frozen at -20 ℃. To ensure the integrity of ATP, avoid repeated freezing and thawing.

ADP Standard： パウダー×1. -20℃で保管. ご使用の前に, 2.34 mL distilled water is added to prepare 1 μモル / mL ATP standard solution, which was frozen at -20 ℃. To ensure the integrity of ATP, avoid repeated freezing and thawing.

AMP Standard： パウダー×1. -20℃で保管. ご使用の前に, 2.0 mL distilled water is added to prepare 1 μモル / mL ATP standard solution, which was frozen at -20 ℃. To ensure the integrity of ATP, avoid repeated freezing and thawing.

製品説明：

Nucleotides have important biological functions. They are a class of compounds composed of three substances: purine base or pyrimidine base, ribose or deoxyribose, and phosphoric acid. They are mainly involved in the formation of nucleosides.

Adenosine triphosphate (ATP) is considered to be a universal energy source that is essential for cell synthesis in the survival and reproduction of all organisms. ATP can be produced through a variety of cellular pathways. The most typical example is synthesis by adenosine triphosphate synthase through oxidative phosphorylation in mitochondria, or synthesis by photosynthesis in plant chloroplasts. The main energy sources for ATP synthesis are glucose and fatty acids.

Adenosine diphosphate (ADP) is widely present in animals, 植物, microorganisms, そして培養細胞. In organisms, ADP is a product of breaking a high-energy phosphate bond (ATP) hydrolyzed to lose a phosphate radical) and releasing energy.

Adenosine monophosphate (AMP) 動物に広く見られる, 植物, microorganisms, そして培養細胞. It is formed after ATP and ADP release energy in the body. It can continue to bind phosphate groups to form adenosine diphosphate (ADP) and adenosine triphosphate (ATP). It is the product of incomplete hydrolysis of ATP.

ATP 、 ADP 、 AMP have an absorption peak at 254 nm, and their content can be determined by high-performance liquid chromatography.

必要だが提供されていない試薬と装置：

High-efficiency liquid chromatograph (C18 column (4.6×250 mm), ultraviolet detector (VWD)), desktop centrifuge, 調整可能なピペット, mortar/ homogenizer, brown EP tube, 50 syringe filters (water, 0.45

µm), syringe, suction filter, filter membrane (organic, water), 50 brown injection bottle (2 mL), acetonitrile (chromatographically pure, 500 mL), ultrapure water.

Preparations before the experiment:

1. 使用 500 mL of chromatographically pure acetonitrile (mobile phase A) そして 1000 mL of configured mobile phase B to filter with a filter membrane to remove impurities in the solvent to prevent clogging the chromatographic column. (Acetonitrile uses a 0.45 µm organic filter membrane for suction filtration, and the configured mobile phase B uses a 0.22 µm aqueous filter membrane for suction filtration).
2. Ultrasound the prepared mobile phases A and B for 30 minutes to remove the gas in the solvent to prevent clogging the chromatographic column and affecting the experimental
3. Preparation of ATP standard: 1 μmol/mL ATP standard solution is diluted with distilled water to 0.5 μmol/mL, 0.1 μmol/mL, 0.05 μmol/mL, 0.01 μmol/mL, 0.005 μmol/mL ATP standard solution. (The prepared standard concentration is for reference only and can be adjusted according to the actual sample concentration). The standard is filtered using an aqueous syringe filter into the brown injection bottle to be tested (please place it at room temperature before testing, so as not to affect the retention time).
4. Preparation of ADP standard: 1 μmol/mL ADP standard solution is diluted with distilled water to 0.5 μmol/mL, 0.1 μmol/mL, 0.05 μmol/mL, 0.01 μmol/mL, 0.005 μmol/mL ADP standard solution. (The prepared standard concentration is for reference only and can be adjusted according to the actual sample concentration). The standard is filtered using an aqueous syringe filter into the brown injection bottle to be tested (please place it at room temperature before testing, so as not to affect the retention time).
5. Preparation of AMP standard: 1 μmol/mL AMP standard solution is diluted with distilled water to

0.5 μmol/mL, 0.1 μmol/mL, 0.05 μmol/mL, 0.01 μmol/mL, 0.005 μmol/mL AMP standard solution. (The prepared standard concentration is for reference only and can be adjusted according to the actual sample concentration). The standard is filtered using an aqueous syringe filter into the brown injection bottle to be tested (please place it at room temperature before testing, so as not to affect the retention time).

手順

1. サンプルの準備:

• • 組織サンプル: According to the ratio of tissue (g): extract solution I (mL) = 1:5~10 (重さを量ることをお勧めします 3 g tissue sample and add 1.5 mL extract solution I) to add extract solution I, homogenate on ice, and extract in an ice bath for 40 分. で遠心分離します。 10000 の回転数 10 min at 4°C, take 750μL of the supernatant, add 750μL of extract II, shake well (5 分) and mix well, centrifuge again at 10000 rpm at 4°C for 10 分, and take the supernatant to filter with an aqueous syringe filter into the brown injection bottle to be tested at room temperature (within 2 h).
  • Cell sample: According to the ratio of 10 百万個の細胞 (units): extract solution I (mL)= 1000~500:1 (it is recommended to take 10 million cell samples and add 1 mL extract solution I) add extraction solution I, ultrasonic breaking Cells on ice (power 300W, ultrasound for 3 秒, interval of 7 秒, total time of 3 分); centrifuge at 4℃, 10000 の回転数 10 分, take 750μL of the supernatant, add 750μL of extract II, shake well (5 分) and mix well, centrifuge again at 10000 rpm at 4°C for 10 分, and take the supernatant to filter with an aqueous syringe filter into the brown injection bottle to be tested at room temperature (within 2h).
  • 血清: It is recommended to take 0.4 mL serum sample, 追加 0.6 mL extraction solution 1, and extract for 40 min in an ice bath. で遠心分離します。 10000 の回転数 10 min at 4°C, take 750μL of the supernatant, add 750μL of extract II, shake well (5 分) and mix well, centrifuge again at 10000 rpm at 4°C for 10 分, and take the supernatant to filter with an aqueous syringe filter into the brown injection bottle to be tested at room temperature (within 2h).

2. 決定 手順：

1. Turn on the computer, turn on the switch buttons of each module of the HPLC, install the chromatographic column, open the software, and set the injection volume in the method group to 10µL, column temperature: 27℃, flow rate 0.8 mL/min, and wavelength 254 nm, the elution program is as shown in the table below, and the sampling time is 70 分. After setting, save the method group.
2. Clean the column with the mobile phase, equilibrate the column with a mobile phase ratio of acetonitrile: mobile phase B (pH = 6.15) = 2: 98, and start the injection after the baseline is stable.
3. Detect the prepared standard solution, the injection volume is 10 μL, the ATP, ADP, and AMP can be separated within 10 分, and the retention time of ATP, ADP, and AMP is about 7.8 分, 6.7min and 5.4min (the pH of the system, column, mobile phase, 等. are different, the retention time is different, only reference).
4. Detect the prepared sample solution, the injection volume is 10 μL, and detect the peak area of ATP, ADP, and AMP at the corresponding retention

3. 計算：

1. Draw standard curves of ATP, ADP, AMP with the standard concentration (µmol/mL) as x and the peak area as the y. Substitute the peak area of the sample into the standard curve to calculate the ATP, ADP, AMP concentration x1, x2, x3 (μmol/mL) in the

ATP content calculation

1. サンプル重量

ATP (μmol/g)＝2 x1×VE÷W=3 x1÷W

ATP (μg/g）=2 x1 ×VE×551.14 ÷W=1653.42 x1÷W

VE: volume of extract solution I, 1.5mL; W: サンプル重量, g; MATP: 551.14; 2: Sample dilution factor.

1. Liquidvolume:

ATP (μmol/mL)＝2 x1 ×VE÷VS=5×x1

ATP (μg/mL）=2 x1 ×VE×551.14 ÷VS =2755.7 ×x1

VE: volume of extract solution I, 1mL; MATP: 551.14; VS： volume of sample, 0.4mL； 2: Sample dilution factor.

1. 細胞量

ATP (μmol/104 cell)＝2 x1 ×VE÷ N =2×x1÷ N

ATP (μg/g104 cell）=2 x1 ×VE×551.14 ÷N =1102.28×x1÷N

VE: volume of extract solution I, 1mL; MATP: 551.14; N: number of cells, 104 as a unit; 2: Sample dilution factor.

ADP content calculation

1. サンプル重量

ADP (μmol/g)＝2 x2×VE÷W=3 x2÷W

ADP (μg/g）=2 x2 ×VE×427.2 ÷W=1281.6 x2÷W

VE: volume of extract solution I, 1.5mL; W: サンプル重量, g; MADP: 427.2; 2: Sample dilution factor.

1. Liquidvolume:

ADP (μmol/mL)＝2 x2 ×VE÷VS=5×x2

ADP (μg/mL）=2 x2 ×VE×427.2÷VS =2136×x2

VE: volume of extract solution I, 1mL; MADP: 427.2; VS： volume of sample, 0.4mL； 2: Sample dilution factor.

1. 細胞量

ADP (μmol/104 cell)＝2 x2 ×VE÷N =0.002×x2÷N

ADP (μg/g104 cell）=2 x2 ×VE×427.2 ÷N =854.4×x2÷N

VE: volume of extract solution I, 1mL; MADP: 427.2; N: number of cells, 104 as a unit; 2: Sample dilution factor.

AMP content calculation

1. サンプル重量

AMP (μmol/g)＝2 x3×VE÷W=3 x3÷W

AMP (μg/g）=2 x3 ×VE×499.19÷W=1497.57×3÷W

VE: volume of extract solution I, 1.5mL; W: サンプル重量, g; MAMP: 499.19; 2: Sample dilution factor.

1. Liquidvolume:

AMP (μmol/mL)＝2 x3 ×VE÷VS=5×x3

AMP (μg/mL）=2 x3 ×VE×499.19÷VS =2495.95×x3

VE: volume of extract solution I, 1mL; MAMP: 499.19; VS： volume of sample, 0.4mL； 2: Sample dilution factor.

1. 細胞量

AMP (μmol/104 cell)＝2 x3 ×VE÷N =2×x3÷N

AMP (μg/g104 cell）=2 x3 ×VE×499.19 ÷N =998.38×x3÷N

VE: volume of extract solution I, 1mL; MAMP: 499.19; N: number of cells, 104 as a unit; 2: Sample dilution factor.

注記:

予防:

1. After the detection, the chromatographic column needs to be flushed with high-concentration ultrapure water (について 20-30 column volumes) to prevent clogging the chromatographic column. Finally, flush the column according to the specifications of the column to prevent damage to the chromatographic
2. The dilution factor of the standard should be determined according to the concentration of nucleotides in the sample. The peak area of nucleotides in the sample must be within the peak area of the standard solution of different concentrations. The dilution factor of the standard is only a reference. If the nucleotide concentration in the sample is too high, it is recommended to dilute it before
3. The sample after extraction is not stable at room temperature, so it needs to be operated as soon as possible.
4. If the sample number is too large, it is recommended to test the standard solution once a day (one standard solution is sufficient) to determine the corresponding retention